Since its inception, Ganggu has focused on the development and manufacturing of high-quality hardware fasteners and precision CNC machining services.

Custom CNC Fastener Parts & OEM Screws, Nuts and Washers 1

Custom CNC Fastener Parts & OEM Screws, Nuts and Washers 2

Custom CNC Fastener Parts & OEM Screws, Nuts and Washers 3

Custom CNC Fastener Parts & OEM Screws, Nuts and Washers 4

Custom CNC Fastener Parts & OEM Screws, Nuts and Washers

Custom CNC fastener parts service supplies drawing-based hardware for machinery, fixtures, equipment maintenance and OEM assemblies. The image presents a broad custom range including CNC turned components, screws, threaded rods, spacers, springs, stamping parts, nuts and washers. As a precision CNC components manufacturer, we can review small turned parts, collars, pins, rings, inserts and other machined hardware. For customers seeking OEM custom screws nuts washers, the project can include material selection, thread definition, finish, marking, packing and repeat-order control.

Brand name:

GANGGU

MOQ:

Package:

support customized

OEM&ODM:

Delivery time:

7 DAYS

Quality guarantee:

After-sales service:

Finish:

support customized

Material:

support customized

Inquiry

Write a Review

Category	Visible examples	Possible supply scope
Custom Screw	Long rods, threaded screws, colored screws and small machine-screw forms	Thread, length, head, drive, finish and marking customization
CNC Parts	Turned collars, rings, pins, spacers, caps and compact machined parts	Drawing-based machining and secondary operations
Nut & Washer	Hex nuts, special nuts, locking forms, flat washers and retaining washers	Matching thread, geometry, finish and packing
Spring	Compression-like springs, rings and small spring forms	Spring geometry and material review subject to specification
Stamping Parts	Clips, flat brackets, formed plates and small stamped shapes	Sheet profile, thickness, forming and hole customization

CNC Component Families

Component family	Typical features	Potential application
Turned collars	Bore, outside diameter, shoulder and groove	Positioning, spacing and retention
Precision pins	Straight body, steps, end details and small holes	Alignment, hinges and mechanisms
Threaded adapters	Internal/external thread, hex or round body	Equipment connection and maintenance
Sleeves and spacers	Bore, length and concentric outside diameter	Assembly spacing and shaft support
Rings and retainers	Circular profile, groove and seating surface	Retaining, alignment and sealing interfaces
CNC caps and plugs	End face, bore, thread or locating feature	Covers, closures and equipment interfaces
Mounting hardware	Holes, flats, slots and small structural faces	Fixtures, brackets and machine assemblies
Replacement parts	Sample-matched or drawing-defined forms	Repair and spare-part programs

Fastener Design Information

Specification	What to define	Why it matters
Material	Grade, condition and environmental requirement	Controls strength, corrosion and machinability
Thread	Standard, diameter, pitch, length and tolerance	Ensures mating compatibility
Head style	Flat, pan, shoulder, button, hex or custom head	Determines seating and clearance
Drive style	Hex, Torx, slot, Phillips or other interface	Determines installation tool
Shank	Plain length, threaded length, shoulder and relief	Controls assembly position
Washer interface	Washer type, outside diameter and thickness	Supports load distribution
Nut interface	Matching thread, lock feature and height	Supports secure assembly
Finish	Machined, plated, coated, anodized or colored direction	Controls appearance and surface performance
Marking	Part number, logo, batch or revision	Supports identification and traceability
Packaging	Bulk, individual, tray, bag, label and carton	Protects parts and simplifies inventory

Materials and Surface Directions

The image contains silver, black, gold, blue, green, purple and other colored appearances. These colors are visual references only; the exact material and finish process must be confirmed.

Material direction	Typical reason to consider	Example components
Stainless steel	Corrosion resistance and durable exposed hardware	Screws, nuts, washers, pins and fittings
Carbon or alloy steel	Strength, rigidity or wear-related requirements	Rods, bolts, shafts and machine hardware
Aluminum	Low weight and suitability for many CNC forms	Spacers, brackets, collars and housings
Brass	Machinability, conductivity or contrasting appearance	Inserts, small fittings and turned parts
Engineering plastic	Insulation, low weight or low-friction performance	Bushings, guides and non-conductive parts
Spring material	Elastic response and repeated movement	Springs and spring-like components; grade to confirm

Finish direction	Possible purpose	Confirmation required
As-machined	Functional metallic appearance	Roughness and visual standard
Polished	Smoother or brighter appearance	Target finish or sample
Plated or coated	Corrosion, color or wear direction	Treatment type and thickness
Anodized	Color and surface protection for suitable aluminum	Alloy, color and coating requirement
Black or colored finish	Visual coding or product appearance	Color standard and durability
Passivated	Surface treatment for suitable stainless steel	Material grade and required standard

CNC Manufacturing Scope

Process	Suitable features	Output direction
CNC turning	Shafts, collars, pins, rings, sleeves and threaded bodies	Rotational components
CNC milling	Flats, slots, pockets, holes and irregular profiles	Blocks, brackets and secondary features
Drilling and boring	Through holes, blind holes and bores	Assembly and fit interfaces
Tapping and threading	Internal and external threads	Screws, nuts, adapters and fittings
Grooving and chamfering	Relief grooves, retaining grooves and edge breaks	Assembly and edge control
Deburring	Burr removal after machining or stamping	Safer handling and cleaner assembly
Stamping	Flat and formed sheet-metal parts	Clips, plates and brackets
Spring forming	Coiled or formed elastic parts	Springs and retention elements
Secondary finishing	Polishing, plating, coating or color treatment	Project-specific appearance and function

OEM Project Workflow

Stage	Work activity	Customer-facing output
1	Receive drawing, sample or BOM	Product reference and revision record
2	Review thread and assembly interfaces	Clarification list and fit questions
3	Confirm material and finish	Material and surface direction
4	Select process route	CNC, stamping, spring forming or combined route
5	Prepare quotation	Project price and assumptions
6	Produce prototype or first article	Sample for assembly and function review
7	Inspect critical features	Thread, dimension, appearance and fit checks
8	Approve production revision	Controlled file for repeat orders
9	Pack and label	Part number, batch and surface protection
10	Repeat supply	Consistent revision, inspection and packing

Customization Services

Custom item	What can be customized	Customer input
CNC hardware geometry	Pins, collars, rings, spacers, caps and adapters	2D drawing, 3D CAD or sample
Screw design	Thread, length, head, shank, shoulder and drive	Fastener drawing or specification
Nut and washer design	Outer profile, thickness, lock feature and thread	BOM, mating screw and assembly data
Spring design	Diameter, wire direction, free length and form	Load, travel, material and drawing
Stamping design	Sheet profile, holes, bend and formed shape	Flat pattern and material thickness
Material	Stainless steel, carbon steel, aluminum, brass, plastic or specified grade	Grade and working environment
Surface finish	Polishing, plating, coating, anodizing or color direction	Standard or reference sample
Marking	Logo, part number, batch and revision	Artwork and marking position
Packaging	Individual, bulk, tray, bag, label and carton mark	Packing instruction
Quantity	Prototype, small batch or repeat production	Quantity and forecast

Applications

Application	Example components	Project focus
Industrial machinery	CNC collars, shafts, screws, nuts and washers	Strength, fit and serviceability
Automation equipment	Pins, spacers, brackets, clamps and fasteners	Alignment and repeatability
Fixtures and tooling	Custom screws, inserts, plates and washers	Datum, clamping and maintenance
Electronics and instruments	Small hardware, spacers, springs and brackets	Clearance, appearance and insulation
Automotive or mobility	Pins, bolts, collars and replacement hardware	Vibration, environment and assembly
Furniture and hardware	Colored screws, brackets, clips and washers	Appearance and installation
Repair and maintenance	Replacement screws, rods, nuts and CNC parts	Sample matching and revision control
OEM assemblies	Coordinated fastener and machined-component packages	BOM, traceability and repeat orders

Quality and Inspection Points

Quality item	Inspection focus	Customer benefit
Material record	Grade and required certificate	Confirms material identity
Thread inspection	Thread form, pitch and usable engagement	Reliable mating
Dimension check	Length, diameter, head, bore and thickness	Supports assembly fit
Drive check	Tool interface and recess condition	Better installation consistency
Spring check	Form, free length and specified load where applicable	Supports elastic function
Stamping check	Profile, bend, hole and burr condition	Improves assembly readiness
Surface inspection	Color, plating, polishing and visible defects	Consistent appearance
First article	Sample review before repeat work	Early fit confirmation
Packing traceability	Part number, batch and revision label	Easier inventory control

FAQ

Q1. What are custom CNC fastener parts?

They are drawing-based fastener and hardware components produced through CNC turning, milling or related secondary processes. Examples include pins, collars, spacers, threaded adapters, caps and custom machine hardware.

Q2. Are screws, nuts and washers available as an OEM package?

The image shows Custom Screw and Nut & Washer categories. OEM custom screws, nuts and washers can be discussed as a coordinated package when the thread, material, finish and assembly relationship are defined.

Q3. What does a precision CNC components manufacturer provide?

A precision CNC components manufacturer reviews drawings or samples, selects a suitable process, machines the component, checks critical features and manages revision and repeat-order requirements.

Q4. Can you make parts from a sample?

Yes. A sample can support replacement-part review or reverse-engineering discussion. A dimensioned drawing or CAD file is recommended for critical fit and repeat production.

Q5. Can the material and finish be customized?

Yes. Stainless steel, carbon steel, aluminum, brass, engineering plastic and other specified materials can be reviewed. Polishing, plating, coating, anodizing, black or colored finishes may be discussed subject to material compatibility.

Q6. Can you supply springs and stamping parts with CNC parts?

The image presents Spring, Stamping Parts and CNC Parts as related categories. A combined supply program can be discussed if drawings, materials, quantities and inspection requirements are provided.

Q7. What information is needed for custom screws?

Provide material grade, thread standard, diameter, pitch, length, head type, drive type, under-head details, finish, marking, quantity and packing requirements.

Q8. Can nuts and washers be matched to a custom screw?

Yes. Matching requires the same thread standard, suitable material and compatible dimensions. Provide the screw drawing or assembly information for review.

Q9. Can colored fasteners be customized?

Color can be discussed as a finish direction. The actual process, color standard, material compatibility and durability should be confirmed before production.

Q10. Can you make one prototype or a small batch?

One-piece prototypes, sample batches and small production runs can be evaluated according to setup, material, inspection and packing requirements.

Q11. Can you make replacement CNC hardware parts?

Yes. Replacement parts can be reviewed from an old component, sample, drawing or equipment assembly. Functional dimensions and mating-part information are useful when the original drawing is missing.

Q12. What is the difference between CNC parts and stamped parts?

CNC parts are cut from material using programmed machining operations, while stamped parts are formed or cut from sheet using dies or presses. The correct route depends on geometry, material thickness, quantity and tolerance.

Q13. How are springs specified?

Spring projects generally require form, wire or material direction, diameter, free length, working length, load or travel and quantity. Final spring performance must be defined by the specification.

Q14. Can logos, batch codes and labels be added?

Marking and labels can be discussed where geometry and process permit. Provide artwork, content, location and traceability requirements.

Q15. Can the product move from prototype to repeat OEM supply?

Yes. After sample approval, the drawing revision, material, process, inspection plan, surface finish, packing and batch requirements can be controlled for repeat orders.

Send your drawing, sample or BOM to discuss custom CNC fastener parts, precision CNC component manufacturing and OEM custom screws nuts washers with coordinated springs, stamping parts, packaging and repeat-order support.

Recommended

Aluminum Stainless Steel CNC Parts, Custom OEM Machining

This drawing-based service produces functional components rather than catalog-only hardware. The images show stepped shafts, sleeves, flanged rings, gear-like parts, threaded connectors, hollow housings and custom brackets.

Our custom CNC machined metal parts can be developed from drawings, CAD files or samples. The CNC machining service for aluminum and stainless steel supports housings, fittings, shafts and assembly hardware. Custom CNC turning and milling parts can combine rotational features with holes, flats, pockets, slots and mounting faces. Final material grades, tolerances, finishes and inspection requirements are confirmed per project.

Custom CNC Machining, Anodized Aluminum & Prototype Parts

We provide a one-stop custom CNC machining service for engineers, OEM buyers and manufacturers. Send 2D/3D drawings or samples for DFM review and prototype planning. The images show anodized brackets, aluminum housings, flanges, rings, turned shafts, threaded fittings, heat sinks and gears.

Our service produces anodized aluminum CNC parts and CNC machining prototype parts, plus stainless steel parts, CNC turning, milling and Swiss-type machining. The images show drawing review, raw-material procurement, FAI, machining, IPQC, dimensional inspection, batch inspection, surface treatment, final inspection and delivery. Exact grades, tolerances, finishes and schedules are confirmed per project.

High Tolerance CNC Machining Services, ISO 9001 Certified Supplier

As a top-tier precision machined parts supplier, we support 3-day prototyping and 7-day batch delivery. Our in-house lab ensures 100% strict quality control, backed by ISO 9001/14001. We provide technical DFM feedback and manufacturing scale for global supply chains.

Custom CNC Milling Services, Machining Prototypes & Anodized Parts

Accelerate your product development with our comprehensive custom cnc milling services. Our facility is optimized for cnc machining prototypes, allowing for rapid iteration of complex housings, structural brackets, and intricate industrial components. We handle a vast range of materials, specializing in anodized cnc aluminum parts with vivid surface finishes, as well as precision-turned stainless steel rods and custom polymer components. Our capabilities include high-gloss mirror polishing and multi-part assembly fitment. Whether you need a single functional prototype or a bridge to mass production, we provide DFM feedback and 100% inspection to ensure every dimension matches your STEP/IGS files.

Send your inquiry

Feel free to contact with us

If you have any questions about our products or services, feel free to reach out to customer service team.